A new snack that will keep kids happy, without making parents feel guilty
A chance to win £100 worth of shopping vouchers
How to carve a pumpkin
Halloween just wouldn’t be the same without an eerie, glowing pumpkin face. So transform your home into a ghoulish grotto with this simple six-step guide to these great balls of fire
The idea of leaving a glowing pumpkin head on your doorstep or in your window dates back to an ancient Celtic tradition. On 31st October, the end of the Pagan new year, a carved turnip containing a burning lump of coal was a sign that you welcomed the spirits of your ancestors into your home. The glowing lantern also provided protection from malevolent entities.
So strong were these beliefs that when European settlers arrived in America, they continued the tradition, swapping the turnip for a pumpkin – which is much easier to carve – and replacing the coal with a candle. When the pumpkin arrived in Britain in the 16th century, it also became the most popular choice for a lantern.
Keep the tradition alive – and those evil spirits at bay – by carving your own protective pumpkin-head lantern. Look for pumpkins with a healthy orange colour all over – avoid any with bruises or patchy colouring. They should be as ripe as possible, and have a sturdy stalk.
Pumpkin step-by-step:
- Cut the lid. Start by making a hole in the top of the pumpkin. You need to cut out a lid that can be replaced once you’ve finished, so angle the knife towards the centre of the pumpkin as you cut. The bevelled edge will keep the lid in place. You might also find it easier to cut a six-sided lid, rather than a circle.
- Clean it out. Next, use a wooden spoon to clean out the seeds and strings. Keep the seeds for later – you can toast them or make some fun Vampire Fingernails. Where you plan to carve the face, scrape away the pulp until the wall is about 3cm thick.
- Add the face. The best way to design the face is to draw it on paper first and tape or pin it to the pumpkin (or soak it in water and just slap it on – the water will make it stick). Then, using a toothpick or opened-up paperclip, prick holes along the lines and into the pumpkin. When you remove the paper, you’ll be left with a dotted outline of the face. You can make these holes easier to see by rubbing flour over the front of the pumpkin.
- Carve. Following the dotted line, cut the shapes out with a pointed saw-blade knife. You may need a few different-sized knives. Use a gentle but firm sawing action to avoid breaking bits off the pumpkin. Pieces that do fall off can be reattached with a toothpick.
- Preserve. Rubbing the insides of the pumpkin with diluted bleach (1:5 ratio) will preserve it for a few more days. The carved edges also deteriorate more slowly if you coat them lightly with Vaseline or any other petroleum jelly.
- Light. Make a basic candleholder from tinfoil and secure the candle at the base. Cut a small chimney hole in the lid to let the heat and smoke escape. You could even use a small electric light – unscrew the plug from the flex, bore a hole in the back of the pumpkin, and feed the flex through. Then reattach the plug. Use a low-wattage bulb if you plan to leave it on for a long time.
Over the page: variations and tips
Get more Halloween dinner party tips or plan a fun celebration with your kids
1 | 2 | next
printer friendly
send to a friend
Delicious
Digg
reddit
Facebook
StumbleUpon
Horoscopes| Message Boards | Quizzes | Newsletters | Join
iVillage Ltd is a UK company registered in England & Wales (3837269) at 80-110 New Oxford Street, London WC1 1HB
