iVillage logo
Home & Garden 
Advertisement
Topics
Hot stuff
Newsletters
Sign up for FREE!




 
Promotions

Fitting an emergency-release door latch

These latches are used to prevent a child being locked inside a room. Privacy door latches with a lever handle may be fitted using a similar technique to that shown for fitting a locking latch. If the handle is a knob design, the technique has to be altered to account for cutting a large access hole in the door to deal with the locking mechanism. Most such mechanisms are opened from the outside using a key inserted into the handle. Some designs simply have a lever that can be turned, or a large slotted screw that can be turned to undo the lock. Many also have a template to follow when fitting.
Measure exact central point for access hole, on both sides of the door. If supplied, use a template. Attach a hole cutter to a cordless drill; the correct size will be specified by the latch manufacturer. Drill into one door face Stop drilling when the bit exits the opposite door face
Change to the opposite side of the door, drilling until the cutter reaches the cut on the other side Drill or cut out the edge of the door to accommodate the latch mechanism Chisel a recess for the latch plate, then fit the latch into the hole.

Extracted from DIY- Know How With Show How published by Dorling Kindersley, price £25.00. Copyright © 2006 Dorling Kindersley Ltd, Text copyright © 2006 Julian Cassell and Peter Parham



 1 |  2 next print printer friendly send to a friend
  
RATE IT
Loading ....
Loading ....
Delicious     Digg     reddit     Facebook     StumbleUpon